Description
Original EPSON L3110 EEPROM Firmware Binary File
This binary file is not a software, but rather a technical file to be used with an EPROM Programmer. This manual procedure involves extracting the EEPROM from the printer’s logic board.
IDENTIFICATION:
1 File: L1 = IC4 = IS25LQ032
REQUIREMENTS:
8-pin EEPROM Programmer, we recommend the RT809F or RT809H model. After making the purchase, you will receive the file in your email.
Instructions for backing up the stored information:
1. Carefully remove the EEPROM(s) from the logic board.
2. Place the EEPROM in the EEPROM Programmer socket and proceed to read its content for a backup.
3. Save the resulting backup file, which will allow you to recover the information in case of any issues during the programming process or if compatibility issues arise.
4. Download the firmware sent to your email and program it into the previously backed-up EEPROM.
5. Ensure that the programming is successful without any errors.
6. Once the programming is completed successfully, re-insert the EEPROM back into its original position on the board. Pay attention to the pin 1 details to ensure correct orientation.
7. Carefully inspect the solder joints to ensure a proper connection.
8. You can now test the equipment. The files available on our site have been tested and approved by our technical team, so the equipment should function correctly.
Count on Camo Systems Technical Support!
If you are unable to complete the procedures, contact us for Technical Support. We want to help you solve any issues with your printer.
