Description
Description
This is the original EEPROM firmware binary file for the EPSON L3210 printer. It is a technical file, not software, intended to be used with an EPROM programmer. The process involves manually extracting the EEPROM from the printer’s logic board.
Identification
1 File: L1 = IC201 = W25Q128
Requirements
You will need an 8-pin EEPROM programmer, we recommend the RT809F or RT809H models. After purchasing, you will receive the file via email.
Instructions
To back up the information stored in the logic board’s memory, follow these steps:
- Remove the EEPROM(s) from the logic board carefully.
- Place the EEPROM in the EEPROM programmer socket and read its content to create a backup.
- Save the resulting backup file to retrieve information in case of issues during programming or compatibility problems.
- Download the firmware we sent to your email and program it onto the backed-up EEPROM.
- Ensure the programming is successful without errors.
- Reinsert the EEPROM into its original position on the board, paying attention to pin 1 for correct orientation.
- Check soldering joints for proper connection.
- Now, you can test the equipment. The files on our site have been tested and approved by our technical team.
Count on Camo Systems Technical Support! If you encounter any issues, feel free to reach out for assistance in solving your printer problems.
