Description
Description
Original EEPROM Firmware BIN File for Epson PX-046A
This is a technical use file, not a software. It is a binary file to be used with the EPROM Programmer, a manual procedure that is done by extracting the EEPROM from the printer’s logic board.
IDENTIFICATION:
1 File: L1 = 25Q64
Requirements:
8-pin EEPROM Programmer, we recommend models RT809F or RT809H
After purchasing, you will receive the file in your email
Instructions:
To back up the information stored in the logic board memory, follow these steps:
- Remove the EEPROM(s) from the logic board carefully
- Place the EEPROM in the EEPROM programmer socket and proceed to read its content to make a backup copy
- Save the resulting backup file, which will allow you to recover the information in case of problems during the programming process or if any incompatibility arises
- Download the firmware we have sent to your email and proceed to program it into the previously backed up EEPROM
- Verify that the programming is successful and error-free
- Once programming is successfully completed, reinsert the EEPROM in its original position on the board. Pay special attention to the details of pin 1 to ensure correct orientation
- Carefully check the solder joints to ensure a proper connection
- Now you can test the equipment. The files available on our site have been tested and approved by our technical team, so the equipment should function correctly
Count on Camo Systems Technical Support!
If you are unable to complete the procedures, contact us for Technical Support. We want to help you solve your printer problems
