Description
To reset the toner on the Pantum M7102DN printer, follow these steps:
1. Turn off the printer and open the front cover.
2. Remove the toner cartridge from the printer and locate the reset gear on the left side of the cartridge.
3. Use a small flathead screwdriver to turn the gear clockwise until it stops.
4. Reinsert the toner cartridge back into the printer and close the front cover.
5. Turn on the printer and wait for it to reset the toner levels.
6. Check the printer status to ensure the toner has been successfully reset.
Following these steps will allow you to successfully reset the toner on the Pantum M7102DN printer and continue printing without any issues.
Video Pantum Printer M7102DW
How to Reset Toner on Pantum M7102DN Printer
Introduction
If you own a Pantum M7102DN printer and you’re facing issues with the toner, you may need to reset it. Resetting the toner on your printer can help resolve error messages such as replace toner or low toner. In this blog post, we will guide you through the steps to reset the toner on your Pantum M7102DN printer.
Step 1: Open the Printer Cover
To reset the toner on your Pantum M7102DN printer, start by opening the printer cover. Make sure the printer is turned on before you proceed to the next step.
Step 2: Remove the Toner Cartridge
Once the printer cover is open, locate the toner cartridge inside the printer. Carefully remove the toner cartridge from the printer by pulling it out.
Step 3: Locate the Reset Gear
Next, you will need to locate the reset gear on the toner cartridge. The reset gear is a small white gear that needs to be turned to reset the toner.
Step 4: Reset the Toner
Using a small flathead screwdriver or a similar tool, rotate the reset gear clockwise until it clicks. This action will reset the toner cartridge and clear any error messages related to toner levels.
Step 5: Reinstall the Toner Cartridge
After resetting the toner, carefully reinstall the toner cartridge back into the printer. Make sure it is securely in place before closing the printer cover.
Step 6: Test the Printer
Once the toner cartridge is reinstalled, close the printer cover and turn on the printer. Print a test page to ensure that the toner reset was successful.
Conclusion
Resetting the toner on your Pantum M7102DN printer is a simple process that can help you resolve toner-related issues. By following the steps outlined in this blog post, you can easily reset the toner and continue printing without any interruptions. If you encounter any difficulties during the process, refer to the printer manual or contact Pantum customer support for assistance.
Contact Us To Download Firmware Pantum M7102DN
Mobile/Zalo: 0915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Whatsapp: https://wa.me/+84915589236