Description
If you need to reset the toner on your Pantum M7300FDW printer, here is a simple guide to help you do so. First, open the top cover of the printer and remove the toner cartridge. Shake the toner cartridge gently to distribute the toner evenly. Next, locate the reset gear on the side of the toner cartridge and turn it in a clockwise direction until it stops. Then, reinsert the toner cartridge back into the printer and close the top cover. Your toner cartridge should now be reset and ready to use.
Video Pantum M7300 M7310 cip reset
Reset Toner Pantum M7300FDW: A Step-by-Step Guide
Introduction
Are you having trouble with your Pantum M7300FDW printer showing low toner levels even though the cartridge is not empty? Resetting the toner on your Pantum printer can help resolve this issue and allow you to continue printing without interruptions. In this guide, we will walk you through the steps to reset the toner on your Pantum M7300FDW printer.
Step 1: Open the Printer Cover
Start by turning off your Pantum M7300FDW printer and opening the printer cover to access the toner cartridge. Make sure to wait a few minutes to allow the printer to cool down before proceeding to the next step.
Step 2: Remove the Toner Cartridge
Carefully remove the toner cartridge from the printer by gently pulling it out. Take note of any labels or markings on the cartridge as you will need this information to reset the toner later on.
Step 3: Locate the Reset Gears
Look for the reset gears on the toner cartridge. These gears are typically located on the sides or back of the cartridge and are used to reset the toner level. Refer to your printer’s manual for specific instructions on finding the reset gears on your Pantum M7300FDW printer.
Step 4: Reset the Toner
Using a small tool or a paperclip, rotate the reset gears on the toner cartridge in a counter-clockwise direction. Make sure to turn the gears smoothly and evenly to avoid damaging the cartridge. Continue rotating the gears until they are back in their original position.
Step 5: Reinsert the Toner Cartridge
Once you have reset the toner cartridge, carefully reinsert it back into the printer, making sure it is securely in place. Close the printer cover and turn on your Pantum M7300FDW printer to complete the toner reset process.
Conclusion
By following these simple steps, you can easily reset the toner on your Pantum M7300FDW printer and resolve any low toner level issues. Remember to check the toner levels regularly and reset the toner as needed to ensure smooth and uninterrupted printing. If you encounter any difficulties during the toner reset process, consult your printer’s manual or contact Pantum customer support for assistance.
Contact Us To Download Firmware Pantum M7300FDW
Mobile/Zalo: 0915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Whatsapp: https://wa.me/+84915589236
