Description
Bin File Epson L120 EEPROM Original Firmware
Description
BINARY FILE OF THE ORIGINAL EEPROM FIRMWARE FOR EPSON L120 PRINTER
This is a technical-use file, not software. It is a binary file intended for use with an EPROM Programmer, requiring a manual process that involves directly extracting the EEPROM from the printer’s logic board.
IDENTIFICATION:
1 File:
L1 = M25PX80
REQUIREMENTS:
8-pin EEPROM programmer; we recommend the RT809F or RT809H models.
After completing your purchase, you will receive the file in your email.
Backup Process:
Steps to Follow:
1. Carefully remove the EEPROM(s) from the logic board.
2. Place the EEPROM into the socket of the EEPROM programmer and proceed to read its contents to create a backup.
3. Save the resulting backup file, allowing you to restore the information in case of issues during the writing process or if any incompatibility arises.
4. Download the firmware we have sent to your email and proceed to write it onto the previously backed-up EEPROM.
5. Ensure that the writing process is completed successfully and without errors.
6. Once the writing is successfully completed, reinstall the EEPROM in its original position on the board. Pay special attention to **pin 1 orientation** to ensure correct placement.
7. Carefully check the soldering to ensure a proper connection.
8. Now you can test the equipment. The files available on our site have been tested and approved by our technical team, so the device should function correctly.
Count on Camo Systems Technical Support!
If you are unable to complete the process, contact us for Technical Support—we are here to help you resolve your printer issues.